schottky rectifier 30 amp bulletin pd-21035 rev. a 07/06 this center tap schottky rectifier series has been optimized for low reverse leakage at high temperature. the proprietary barrier technology allows for reliable operation up to 175c junction temperature. typical applications are in switching power supplies, converters, free-wheeling diodes, and re- verse battery protection. 175 c t j operation center tap configuration low forward voltage drop high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance high frequency operation guard ring for enhanced ruggedness and long term reliability lead-free ("pbf" suffix) description/ features 30ctq...spbf 30ctq...-1pbf major ratings and characteristics i f(av) rectangular 30 a waveform v rrm 80 - 100 v i fsm @ tp = 5 s sine 850 a v f @ 15 apk, t j = 125c 0.67 v (per leg) t j range - 55 to 175 c characteristics values units i f(av) = 30amp v r = 80 - 100v case styles d 2 pak 30ctq...spbf 30ctq...-1pbf to-262 anode 1 3 2 base common cathode 2 a node common cathode anode 1 3 2 base common cathode 2 a node common cathode www.vishay.com 1 document number: 94193
30ctq...spbf, 30ctq...-1pbf series bulletin pd-21035 rev. a 07/06 i f(av) max. average forward (per leg) 15 a 50% duty cycle @ t c = 129c, rectangular wave form current * see fig. 5 (per device) 30 i fsm max. peak one cycle non-repetitive 850 5 s sine or 3 s rect. pulse surge current (per leg) * see fig. 7 275 10ms sine or 6ms rect. pulse e as non-repetitive avalanche energy 7.50 mj t j = 25 c, i as = 0.50 amps, l = 60 mh (per leg) i ar repetitive avalanche current 0.50 a current decaying linearly to zero in 1 sec (per leg) frequency limited by t j max. v a = 1.5 x v r typical voltage ratings 30ctq080s 30ctq100s 30ctq080-1 30ctq100-1 v r max. dc reverse voltage (v) v rwm max. working peak reverse voltage (v) 100 parameters absolute maximum ratings parameters values units conditions a t j max. junction temperature range -55 to 175 c t stg max. storage temperature range -55 to 175 c r thjc max. thermal resistance junction 3.25 c/w dc operation to case (per leg) r thjc max. thermal resistance junction 1.63 c/w dc operation to case (per package) r thcs typical thermal resistance, case 0.50 c/w mounting surface , smooth and greased to heatsink (only for to-220) wt approximate weight 2 (0.07) g (oz.) t mounting torque min. 6 (5) max. 12 (10) marking device 30ctq...s case style d 2 pak 30ctq...-1 case style to-262 thermal-mechanical specifications kg-cm (ibf-in) parameters values units conditions v fm max. forward voltage drop 0.86 v @ 15a (per leg) * see fig. 1 (1) 1.05 v @ 30a 0.67 v @ 15a 0.82 v @ 30a i rm max. reverse leakage current 0.55 ma t j = 25 c (per leg) * see fig. 2 (1) 7.0 ma t j = 125 c c t max. junction capacitance (per leg) 500 pf v r = 5v dc (test signal range 100khz to 1mhz) 25c l s typical series inductance (per leg) 8.0 nh measured lead to lead 5mm from package body dv/dt max. voltage rate of change 10000 v/ s (rated v r ) t j = 25 c t j = 125 c electrical specifications (1) pulse width < 300 s, duty cycle <2% v r = rated v r parameters values units conditions following any rated load condition and with rated v rrm applied 80 www.vishay.com 2 document number: 94193
bulletin pd-21035 rev. a 07/06 30ctq...spbf, 30ctq...-1pbf series fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - max. thermal impedance z thjc characteristics (per leg) fig. 1 - max. forward voltage drop characteristics (per leg) 0.0001 0.001 0.01 0.1 1 10 100 020406080100 r r 150c 125c 100c 75c 50c 25c reverse current - i (ma) t = 175c j reverse voltage - v (v) 100 1000 020406080100 t = 25c j r junction capacitance - c (pf) t reverse volta g e - v (v) 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 thjc t , rectangular pulse duration (seconds) single pulse (thermal resistance) 1 thermal impedanc e z (c/ w) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20 j dm thjc c 2 t 1 t p dm 1 2 no tes: 1. duty fac tor d = t / t 2. peak t = p x z + t forward voltage drop - v fm (v) instantaneous forward current - i f (a) 1 10 100 1 000 0 0.5 1 1.5 2 2.5 tj = 175?c tj = 125?c tj = 25?c www.vishay.com 3 document number: 94193
30ctq...spbf, 30ctq...-1pbf series bulletin pd-21035 rev. a 07/06 fig. 8 - unclamped inductive test circuit free- w heel diode 40hfl40s 02 current monitor hig h-speed switch irfp460 l dut rg = 25 o h m vd = 25 volt + (2) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm @ (i f(av) / d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r @ v r1 = 10 v fig. 7 - max. non-repetitive surge current (per leg) fig. 5 - max. allowable case temperature vs. average forward current (per leg) fig. 6 - forward power loss characteristics (per leg) 100 110 120 130 140 150 160 170 180 02468101214 dc allowable case temperature - (c) f( a v ) se e no te ( 2 ) sq ua re wa ve (d = 0.50) 80% ra t ed v a p p lied r average forward current - i (a) 0 1 2 3 4 5 6 7 024681012 dc average power loss - (watts) f( a v ) rm s li m i t d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 average forwa rd current - i (a) 100 1000 10 100 1000 10000 fsm non-repetitive s urg e current - i (a) p at any rated load condition and with rated v ap plied fo l l o w i n g su r g e rrm square wave pulse duration - t (mic rosec ) www.vishay.com 4 document number: 94193
bulletin pd-21035 rev. a 07/06 30ctq...spbf, 30ctq...-1pbf series conform to jedec outline d 2 pak (smd-220) dimensions in millimeters and (inches) outlines table modified jedec outline to-262 dimensions in millimeters and (inches) www.vishay.com 5 document number: 94193
30ctq...spbf, 30ctq...-1pbf series bulletin pd-21035 rev. a 07/06 assembly lot code international rectifier logo lot code 1789 assembled on ww 19, 2002 example: p = lead-free part number week 19 date code year 2 = 2002 this is a 30ctq100-1 lot code 8024 assembled on ww 02, 2000 assembly lot code logo international rectifier p = lead-free date code year 0 = 2000 week 02 part number this is a 30ctq100s 30ctq100s part marking information d 2 pak to-262 dimensions in millimeters and (inches) tape & reel information www.vishay.com 6 document number: 94193
bulletin pd-21035 rev. a 07/06 30ctq...spbf, 30ctq...-1pbf series ordering information table ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7309 07/06 data and specifications subject to change without notice. this product has been designed and qualified for industrial level and lead-free. qualification standards can be found on ir's web site. 30 c t q 100 s trl pbf device code 1 5 2 4 3 6 1 - current rating (30a) 2 - circuit configuration c = common cathode 3 - t = to-220 4 - schottky "q" series 5 - voltage ratings 6 - y s = d 2 pak y -1= to-262 7 - y none = tube (50 pieces) y trl = tape & reel (left oriented - for d 2 pak only) y trr = tape & reel (right oriented - for d 2 pak only) 8 - y none = standard production y pbf = lead-free 7 8 080 = 80v 100 = 100v www.vishay.com 7 document number: 94193
legal disclaimer notice vishay document number: 99901 www.vishay.com revision: 12-mar-07 1 notice the products described herein were acquired by vishay intertechnology, inc., as part of its acquisition of international rectifier?s power control systems (pcs) business, which closed in april 2007. specifications of the products displayed herein are pending review by vishay and are subject to the terms and conditions shown below. specifications of the products displayed herein are subject to change without notice. vishay intertechnology, inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale. international rectifier ? , ir ? , the ir logo, hexfet ? , hexsense ? , hexdip ? , dol ? , intero ? , and powirtrain ? are registered trademarks of international rectifier corporation in the u.s. and other countries. all other product names noted herein may be trademarks of their respective owners.
|
